STEEL BUILDINGS
Construction of steel buildings using Building System Solution is one of our main advantages. The Building System Solution is suitable option for any non-residential building, as it allows the project to be prepared in a short time, at low cost and consistent with the technology of production and installation.
Get to know everything important for the construction of buildings using the steel structure system.
PRIMARY AND SECONDARY FRAMING
Every Steel Buildings Consists of Primary and Secondary Framings.
1. PRIMARY FRAMING
The primary framing includes transverse steel frames. The steel frames may have clear span dimensions (external dimension of the steel structure) from 8 to 60 m and heights from 3 to 12 m. The roof slope is between 6 % and 40 %. There are no limits on the total length of the building. Centre distance from frame to frame may vary from 4 to 9 m. Construction of buildings with bigger clear span – up to 100 m – is also possible without the supportofintermediate columns and with up to 20 m height.
Annexes, canopies, terraces, roof extensions (eaves), parapets and other architectural and functional additions can be added to the main building.
The elements of the main frames – rafters and columns – are formed by ready hot-rolled profiles or welded H shapes. Depending on the design and technological requirements the implementation by trusses is also possible. Frame joints and all other erection joints are fixed by bolts.
2. SECONDARY FRAMING
Secondary supporting elements – of the roof (purlins), of the walls (girts) and frames of doors and windows (“black” frames) – are thin, light cold-rolled Z-and C-profiles, hot galvanized Z275 (275 gr / m2). Connections to the main structure and all other joints are made by bolted joints.
SANDWICH PANNELS - WALL AND ROOF SYSTEMS
Every Building Needs a Face. Set the Desired Shape of Your Building by Choosing One of the Proposed Variants of Roof and Wall System. The Most Demanded Systems Are From Sandwich Panels, They Are Two Types: Wall and Roof Panels.
1. ROOFSYSTEMS:
TRS Roof System
This roof system consists of steel “sandwich” panels, which combine many technical and economical advantages in the construction of thermal and weathertighness coatings. They are easy to install and offer excellent insulation.
Consists of:
- Two galvanized steel panel, custom colour;
- Filling – polyurethane or mineral wool with different thickness.
Advantages:
- Additional sealing and life time extension is provided due to a butyl strip used in all parts with panel-to-panel contact;
- With special care to parts where a thermal bridge is possible to appear by usage of additional sealing insulation against condensation on the inner surfaces;
- The system has a wide variety of equipment completions – gutters, drain-pipes, ridge and cornice elements;
- There is a large range of accessories, fully compatible with the profile, ensuring optimum weathertightness and pleasing aesthetics – translucent panels, skylights, smoke vents, roofjacks, etc.
PR Roof System
Suitable for all buildings types, it provides good thermal insulation and excellent weathertightness. The erection is relatively slow but is economical, practical and functional.
Consists of:
- Profiled galvanized steel panel, custom colour;
- Mineral wool with different thickness;
- Vapour barrier;
- Isoblock – insulating strips that minimize thermal bridges .
Advantages:
- Provides excellent thermal insulation, cheaper than the “sandwich” panels;
- Additional sealing and life time extension is provided due to a butyl strip used in all parts with panel-to-panel contact;
- It has good fire safety features;
- Prevents from condensation on the inner surface unlike the “naked” steel panel;
- The system has a wide variety of equipment completions – gutters, drain-pipes, ridge and cornice elements;
LMR600 Roof System
More info about LMR600 expect soon.
LTH Roof System
This system is performed by high profiled LT steel panels mounted directly on the primary frame. It saves the usage of purlins. Tensions in the roof are absorbed by horizontal pipes mounted in the lower flank of the rafter. There are no restrictions in the insulation thickness.
Consists of:
- Weathertightness with reinforced TPO or PVC membrane;
- Mineral wool with 150 kg/m3 bulk density and varying thickness;
- High-profiled galvanized LT steel panel.
Advantages:
- Allows small roof slopes;
- Suitable for buildings with parapet;
- Simple and quick installation;
- The system has a wide range of equipment completions – gutters, drain-pipes, ridge and cornice elements;
- Easy integration of all kinds of accessories – translucent panels, skylights, smoke vents, roofjacks, etc.
2. WALL SYSTEMS:
WCL Wall System
The system consists of steel “sandwich” panels with a variety of colours and profiles of the internal and external steel panel. Polyurethane and mineral wool filling is used, depending on the aesthetic, thermal and fire safety requirements for each site. Usually comes with invisible bolts, which provides excellent joint sealing and extended life time of the panel. They are easily installed and are aesthetical solution.
Consists of:
- Two galvanized steel panels, custom colour;
- Filling – polyurethane or mineral wool with different thickness
Advantages:
- Additional joint sealing and life time extension is provided due to reinforced aluminum foil strips. This protects from moisture coming from vapour in the polyurethane foam. Spongy rubber sealing creates a better air seal;
- With special care to parts, where a thermal bridge is possible to appear, by usage of additional sealing insulation against condensation on the inner surfaces.
РА Wall System
Suitable for all buildings types, it provides good thermal insulation and weathertightness. The erection is relatively slow but is economical, practical and functional.
Consists of:
- Shaped galvanized steel panel, custom colour;
- Mineral wool with different thickness;
- Vapour barrier;
- Isoblock – insulating strips that minimize thermal bridges;
- Option: inside sheeting mounted to hide the wall girts.
Advantages:
- Provides excellent thermal insulation, cheaper than the “sandwich” panels;
- It has good fire safety features;
- Prevents from condensation on the inner surface unlike the “naked” steel panel;
- The system has a wide variety of equipment completions – gutters, drain-pipes, ridge and cornice elements – corners and building plinth profiles, forming of doors and windows with cornices;
- Allows combinations with all modern construction materials.
FLASHINGS AND ACCESSORIES
1. FLASHINGS
All roof and wall systems are available with a wide variety of flashings:
- Gutters and drain pipes;
- Ridge elements;
- Cornice elements;
- Corners profiles;
- Plinth;
- Forming of doors and windows with cornices;
- Volumetric equipment for transition between the elements;
- Variety of equipment related to specific parts like cornices, roof falls, change of the roof slope, parapets, architectural elements, etc.
Advantages:
- They contribute to the specific pattern of the building regardless of the selected type or provider of the “sandwich” or the steel panels
- Developed and tested over time, considering the experience of all the designers, engineers and installation teams of the company
- Facilitates the work of architects
- Saves costs for the project development
- Provides sufficient flexibility when choosing different architectural solutions
- Optimizes the production and mounting
- Saves costs for removal of experimental errors
2. ACCESSORIES
We offer a wide range of fully integrated into the roof and wall systems accessories – translucent panels, skylights, smoke vents, roofjacks, technological wall bays and other accessories, providing optimum weathertightness and pleasing aesthetics.
Other our services
DESIGN
Construction of Client's Project Design
CONCRETE WORKS
